Cement Additive for Cement-Based Concrete Polypropylene Fiber Basic Info
Model NO.: Elt-PPMF
Modified Fiber Function: Reinforcement
Certification: CE, ISO
Raw Material: 100% Vigin Polypropylene
Fiber Diameter: 20um-30um
Product Name: Concrete Polypropylene Fiber
Acid &Alkali Resistance: Strong
Modified Fiber Length: 4,6,8,12,16,18,20,24,28,30mm ,Times of 4mm or 6mm
Transport Package: 900g or 1000g/Film Bag, 18kgs /Plastic Woven Bag
Type: Concrete Fiber
Material: Polypropylene Fiber
Modified Fiber Color: White
Crack Elongation: 20+/-5%
Fiber Type: Monofilament
Modified Fiber Tensile Strength(MPa): 450 Min.
HS Code: 5503400000
Cement Additive for Cement-Based Concrete Polypropylene Fiber Product Description
1,Concrete fiber Description:
EltFiber-PPMN monofilament fiber was produced by referring foreign advanced technology for fiber spinning, modified by adding functional additive and special surface-treating. Mixing into cement concrete, it has many advantages such as good dispersing, better water affinity, strong linking force. It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc.
2,Concrete fiber Specification
|Raw Material :||Polypropylene||Crack Elongation:||20+/-5%|
|Fiber Type :||monofilament||Fiber Diameter:||20um-30um|
|Melting Point(C Deg.) :||160 - 170||Density(g/cm3) :||0.91+/-0.01|
|Acid &Alkali Resistance :||Strong||Tensile Strength(MPa):||450 min.|
|Length:||4,6,8,10, 12, 16,18,20etc. times of 4 or 6mm||water absorbency :||NO|
3, Concrete fiber packing:
A,600g or 900g or 1000g / pe film bag, 18kg/ Plastic woven bag,8tons/1x20`gp,20tons/40"HQ
B,600g or 900g or 1000g / pe film bag,18kgs/carton,7.2tons/1x20`gp
C,Water soluble bag is available also.
4,Concrete fiber Applications:
A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
D). Suit for any mortar projects and common concrete projects.
E). Highway, bridge and other roads.
5,Typical physical properties:
(1 )Concrete fiber Functions:
A.Resist to shrink & crack
B.Increase seepage resistance
C.Increase friction resistance
D.Increase freezing & thawing resistance
E.Improve tendons protection
F.Replace steel net (using in plastering)
G. Prevent mortar split and crackle expansion H.Increase impact resistance and peeling resistance
(2)Concrete fiber Features:
A).No agglomeration and easily spread around in mortar or concrete. Guarantee the property of crack resistance effectively
B).Apply conveniently. No need to change the proportion of mortar, and just put the fibers into the mortar mixture and stir for a moment after adding water.
C).Has fine economic property. The equivalent dia. of polypropylene monofilament is only φ 0.02mm, so the ratio of dia. And surface is high and on the basis of crack resistance, it can reduce the amount (0.6kg/m 3 ) and cut down the cost effectively.
D).Be better to plaster. Because a great number of thin fibers spread into mortar evenly, so the plastering is much easier and this can improve the binding strength between surface and base.
E).The fiber has stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
Our other concrete fiber :
6,Concrete fiber Applying Instruction:
A).Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough, and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.
B).Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.
Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.
A. SGS verified suppliers
B. CE certificate offered
C. Professional suppliers with rich export experience
D. Small order / OEM order acceptable
E. Full-time tracking your orders
F. One-stop solutions to you, such as Hotel reservations,Factory visiting or Auditing, Sourcing, Quality control, Warehousing & Logistics service, customs declaring and tracking your order continuously.
2),we handle orders as SGS management system ,and issue report after shipment to customer.
A.Test DATA report will be sent to you asap after cargo ready for shipment.
B.While loading container , pictures will be took as SGS inspection process
a.Empty container b.The first layer of shipment
c.loading half of container d.full of container before close to the door
e.seal of container f.container seal lock with number
After pics are took ,Container loading Report with container information and pictures will be sent to you !!
- Three Issues Limiting Textile Enter...
- Chemical Fiber Textile Industry And...
- Functional Fabrics And Wide Space
- Ecological Fiber Has Great Potential
- Difference Or Chemical Fiber Indust...
- Mechanical Substitution Of The Text...
- Textile Machinery And Machinery Sub...
- Change Building On Exports Textiles...
- Textile Merchant Which Changes Are ...
- Textile Fabrics Mildew Common Clean...
- 100% Virgin Grade PP Fiber for Conc...
- 12mm High Tenacity PP Monofilament ...
- Outdoor Roofing Material Waterproof...
- Hot Selling 15D*64mm Recycled Polye...
- Polypropylene PP Monofilament Multi...
- Recycled Hollow Polyester Staple Fi...
- Regenerated Polyester Staple Fiber ...
- Grade a Hcs Polyester Staple Fiber ...
- Super White Pet Recycled Polyester ...
- Easy Dispersion Twisted Bundle PP F...