Easy Dispersion Twisted Bundle PP Fiber 54mm Basic Info
Model NO.: Elt- PP fiber
Polypropylene Staple Fiber Function: Reinforcement
Certification: SGS, CE, ISO
Polypropylene Staple Fiber Shape: Twist
Equivalent Dia(mm): 0.3±0.05
Product Name: Easy Dispersion Twisted Bundle PP Fiber 54mm
Elastic Modulus (MPa): >3500
Polypropylene Staple Fiber Break Tensile Ratio(%): 8-15
Transport Package: 1000g/PE Film Bag, 10kgs/Plastic Woven Bag
Polypropylene Staple Fiber Type: Concrete Fiber
Material: Polypropylene Fiber
Length: 20,30,50, 54mm Ect
Density(g/cm3): 0.91 +/- 0.01
Polypropylene Staple Fiber Crack Ratio: 20+/-5 %
Polypropylene Staple Fiber Tensile Strength: >500 MPa
HS Code: 5503400000
Easy Dispersion Twisted Bundle PP Fiber 54mm Product Description
1,Twisted Bundle PP Fiber Introduction
EltFiber-PPT/B twist/bunchy fibre can beused to instead of steel fibre for reinforcement to cement concrete.
Compared with steel fibre, it has the advantage of easy dispersing and blending, no damage to the mixingequipments, etc.
The rigid polymer fibre is usedpolypropylene as its raw material, produced the rough surface Treatment by special parallel thread extruding & twisting process. It has high break strength, better dispersion and strong combining ability, will be widely used to instead of steel fibre to reinforce the cement concrete and crack resistant.
2, Twisted Bundle PP Fiber specification:
|Density(g/cm3)||0.91 +/- 0.01||Raw material||PP|
|Length(mm)||20,30,48,50, 54mm||Equivalent Dia(mm)||0.3±0.05|
|Shape||twisted/bunchy||break tensile Ratio(%)||8-15|
|Crack Ratio||20+/-5 %||Melting point ( C. Deg)||160-170|
|Tensile Strength||>500 mpa||Water absorbency||NO|
|Elastic Modulus (mPa)||>3500||Resistance to acid & alkali||strong|
Recommend adding quantity: 2.0 - 3.0 kgs fiber to one cubic meter concrete as per different application.
3. Twisted Bundle PP Fiber Function:
A. Decrease the fragility of high strength concrete;
B. Increase the quality of concrete;
C. Increase the freezing resistance of concrete;
D. Increase the impact resistance of concrete;
E. Increase the durability resistance of cncrete;
F. Increase the fire resistance of concrete.
4. Twisted Bundle PP Fiber Package: 1000g/pe film bag,10kgs/plastic woven bag,5.5tons/1x20`gp, or 12tons/1x40`HQ.
May packed as customers' requirement, Water soluble bag and Carton is also okay.
5. Twisted Bundle PP Fiber Application Field:
A. The surface of road, bridge, runway and floor of the factory.
B. Wall and roof of the tunnel and mine.
C. Dam, river, bridge pier, dock and military protection facilities.
6.Twisted Bundle PP Fiber Applying Instruction
(1)Ration design of the fibre concrete:
Generally the recommended amount to add to the concrete is more than 2.7kg per sqm ( volume ratio is 0.3% ), reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete.
(2) length: 50mm or 54mm for common crack-resistant requirement.
Usually, it is no need to Change the matching ratio of the concrete.
Considering the requirement of fissure-resistant, the polymer fiber is recommend to combine with the polypropylene fiber mesh with the volume ratio of 1: 1 ( 0.9kg fiber-mesh per sqm of cement concrete).
(4) Mixer Adoption: Double-axle horizontal compelling mixer is priority.
(5) Mixing process:
Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes,fiber will fully spread and then add cement and water and stir normally.
The addition of materials also can be put into as common concrete,but the stirring time
should be properly prolonged to make fiber completely Mixed.
Our Other Mainly concrete fiber :
(6) Shaping & Maintenance
There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be done same as the normal concrete.
A. SGS verified suppliers
B. CE certificate offered
C. Professional suppliers with rich export experience
D. Small order / OEM order acceptable
E. Full-time tracking your orders
F. One-stop solutions to you, such as Hotel reservations,Factory visiting or Auditing, Sourcing, Quality control, Warehousing & Logistics service, customs declaring and tracking your order continuously.
2),we handle orders as SGS management system ,and issue report after shipment to customer.
A.Test DATA report will be sent to you asap after cargo ready for shipment.
B.While loading container , pictures will be took as SGS inspection process
a.Empty container b.The first layer of shipment
c.loading half of container d.full of container before close to the door
e.seal of container f.container seal lock with number
After pics are took ,Container loading Report with container information and pictures will be sent to you !!
- Three Issues Limiting Textile Enter...
- Chemical Fiber Textile Industry And...
- Functional Fabrics And Wide Space
- Ecological Fiber Has Great Potential
- Difference Or Chemical Fiber Indust...
- Mechanical Substitution Of The Text...
- Textile Machinery And Machinery Sub...
- Change Building On Exports Textiles...
- Textile Merchant Which Changes Are ...
- Textile Fabrics Mildew Common Clean...
- Good Rebound Degree Wholesale Polye...
- Highly Elastic Polyester Staple Fib...
- High Strength PP Monofilament Fiber...
- Solid Polyester Staple Fiber for 1.2D
- Imitation Virgin Fiber 3D Super White
- Pet Bottles Recycle Polyester Stapl...
- 1.2D, 1.4D Virgin Grade Polyester F...
- Polypropylene Fiber Manufacture PP ...
- 7D Polypropylene Staple Fiber for T...
- UV Resistance High Tensile Polyprop...